Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the eight T10 Torx screws securing the LCD to the outer case.

Be careful not to touch the display as the oil from your fingers may leave a residue that can be difficult to remove.

If necessary, peel the EMI gaskets located near the top center edge of the display assembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.