Перейти к основному содержанию
Помощь

iMac Intel 27" EMC 2429 Display Replacement

Редактирование шага 2 —

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 17 руководства, которые включают этот шаг.

Тип шага:

Перетащите чтобы изменить порядок

Carefully lay the iMac stand-side down on a flat surface.

Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of angled tweezers can also work well.

Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.

After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side.

Raise and hold the display high enough to access the cables.

Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.

Ваш вклад лицензируется под свободной лицензией Creative Commons .