Перейти к основному содержанию
Присоединяйся к сообществу ремонтников - Создай аккаунт

iPhone 1st Generation SIM Card Replacement

Выберете то, что вам нужно

  1. iPhone 1st Generation SIM Card Replacement, SIM Card: шаг 1, изображение 1 из 1
    • Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.

    • Press down on the paper clip until the SIM card tray pops out.

    Спросите у FixBot
  2. iPhone 1st Generation SIM Card Replacement: шаг 2, изображение 1 из 1
    • Grasp the SIM card tray and slide it out of the iPhone.

    Спросите у FixBot
Заключение

To reassemble your device, follow these instructions in reverse order.

41 человек успешно провели ремонт по этому руководству.

iRobot

Участник с: 09/24/09

1 Репутация

Автор 636 руководств

7 Комментарии к руководству

thats what i did too. but it froze..

i dont know what to do..

Marie - Ответить Поделиться

Can't access

hope - Ответить Поделиться

Try with a little strap cut out from a radiology exam sheet. Put it inside the sim tray and try to open again. It works.

Henri Salvat - Ответить Поделиться

Does anyone know where I can get a SIM tray and card for the 1st get iPhone model A1203?

TIA

J R Rosen - Ответить Поделиться

Did you ever find an answer for this? I was given a 1st gen iPhone A1203 and it doesn't have a sim card. Thanks.

Alex Omar - Ответить Поделиться

Добавить комментарий

Статистика просмотров:

За последние 24 часов: 4

За последние 7 дней: 22

За последние 30 дней: 158

За всё время: 85,828