Репутация: 61
2
2
Hi
I have Carge 3 that can't turn on, unless it's connected to the USB port.
A. There is a way to solve this issue? Pressing common button combinations do not work
B. There is a way to update firmware using my PC? The JBL Connect app can't find the device (though I can play music from my android)
Thanks
Boaz
Это хороший вопрос?
Репутация: 37
1
I have this problem after trying to update my charge 3. Unfortunatelly for me, this method does not work.
Был ли этот ответ полезен?
How to downgrade jbl charge 3? Coz i want to connct it together with jbl flip 3.
Zu zhzz5 und und jjhhjund h5
Репутация: 25
1
i think if you plug it in and hold the connect plus button and the volume up button until it turns off it should fix it
Был ли этот ответ полезен?
you &&^& my xtreme
https://www.youtube.com/watch?v=Ei54MPrA...
Its Locked, Watch this video it will Show how to unlock it.
Репутация: 13
1
you have to keep the Connect button and the volume + button pressed when the device is switched on
Был ли этот ответ полезен?
Deu certo com esse procedimento !
Tava com problema na boombox
Just fixed mine with same issue.
Follow this sequence:
1. Turn the device on while connected to charger
2. Press the call (phone icon) and the volume up (+) button at the same time and keep them pressed. After a few seconds the speaker will shut down.
3. Release the buttons.
4. Turn the speaker back on. It will automatically enter into search mode... And there you are, memory wiped up.
I then did the firmware update.
Был ли этот ответ полезен?
I tried this process but did not solve my problem to.
O opened a ticket on support.
Был ли этот ответ полезен?
I have the same problem. How did you solve it? I can't find anything to flash the software. Now my box can't even connect to my phone. It just keeps restarting.
With best regards
Paul
I have the same issue. Now my Charge 3 does not connect.
This is terrible !
Был ли этот ответ полезен?
I had a swollen battery. Check it first. The problem has been fixed after replacing the battery and holding Connect + Volume up
Был ли этот ответ полезен?
Plug Power and press connect button for a few secounds.
Был ли этот ответ полезен?
I used the JBL Connect app to update my firmware. I'm using an android device.
Был ли этот ответ полезен?
y qué hay del JBL Flip 3 Stealth Edition? Es un Flip 3 sin Connect, no lleva ni el botón... De hecho ni se puede usar el software Connect, así que es imposible actualizar éste altavoz. Sin embargo el UE Boom 2 Lite que también tengo sí que conecta con la aplicación UE global para esos altavoces, y por supuesto ha supuesto mi decisión de comprar un Megaboom 2 para complementar al "pequeño" UE Boom 2. Está claro que JBL es especial, pero ya que haces un gran altavoz deja que al menos se pueda actualizar fácilmente el firmware.
Jbl like to Shut down suddenly when we played 2 or3 song
Был ли этот ответ полезен?
You must connect the speaker to AC and hold Connect+ and Volume Up. It should be powered off by itself and then you could use it without AC.
Был ли этот ответ полезен?
My JBL link portable doesn’t connect how do I fix it ?
Был ли этот ответ полезен?
За последние 24часов: 5
За последние 7 дней: 12
За последние 30 дней: 53
За всё время: 49,646
1 Комментарий
How to update JBL Xtreme with PC???
из Skola IVSK