Faceplate Compatibility with other versions

Question

Контроллер DualSense V3

Руководства по ремонту, разборке и устранению неисправностей для контроллера Sony PlayStation 5 DualSense третьего поколения. Идентифицируется по номеру модели CFI-ZCT1W и модели материнской платы BDM-030.

Вопросов 20 Показать все | 2 Части Магазин

Thorne @thorne1240

Репутация: 1

Опубликовано: 20 мар 2026 г.

Опции

Faceplate Compatibility with other versions

Hi, I own a V3 Controller and it is the Spider-man 2 variant controller. It has developed stick drift and I am hoping to avoid having to solder anything.

Can I transfer the face plate and track pad plate onto a V5 controller?

If not, will the motherboard and sticks from a V5 fit and connect with internals from a V3?

For reference i have the motherboard serial number BDM-030. Any help is appreciated I would love to keep the livery on this controller if joystick replacement is the only option then that'll have to do. Thank you.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Счет 0

Добавить комментарий

1 ответ

koppie007 @dan0 Репутация: 51к 20 18 34 · Answer 1 · 2026-03-21T02:07:27-07:00

Наиболее полезный ответ

koppie007 @dan0

Репутация: 51к

20

18

34

Опубликовано: 21 мар 2026 г.

Опции

Hi!

Yes that is possible, but you do need the EXACT same model. Also the motherboard must match with each other.

It could be a little difficult, if you buy a incorrect model it just won’t fit as it should be.

Also another option would be to bring to a local repair shop and ask them to solder new hall effect sticks in.

Please let me know how it goes :)

Был ли этот ответ полезен?

Да Нет

Счет 2

2 Комментариев:

Hi! Apologies for the late response I just attempted it, and it did indeed work. I bought a brand new dual sense and was able to transfer all of the internal components apart from the touchpad which I wanted to retain and the new battery housing. All the internals from a new controller bolt up perfectly. I wanted to reuse the touchpad and faceplate so I did. Due to small changes in architecture I had to also reuse the old battery housing, rear plate and trim piece.

23 июл 2026 г. из Thorne

No problem at all! Glad that you got it solved :)! Thanks for sharing this with us! Have a great day!

24 июл 2026 г. из koppie007

Добавить комментарий

Контроллер DualSense V3

Faceplate Compatibility with other versions

1 ответ

Добавьте свой ответ