Перейти к основному содержанию
Присоединяйся к сообществу ремонтников - Создай аккаунт

Disassembling Macintosh IIsi System Fan

    1. Disassembling Macintosh IIsi System Fan, System Fan: шаг 1, изображение 1 из 1
      • The fan recieves power from two contacts on the logic board and has no connector.

      Спросите у FixBot

      Добавить комментарий

    2. Disassembling Macintosh IIsi System Fan: шаг 2, изображение 1 из 3 Disassembling Macintosh IIsi System Fan: шаг 2, изображение 2 из 3 Disassembling Macintosh IIsi System Fan: шаг 2, изображение 3 из 3
      • In all of the years that I have worked on this machine, I have found no good way to remove the fan.

      • The best way to start, is to push in here on the side of the fan.

      • Being careful not to exert too much force, try to push in, and wiggle the fan outward as such. (2nd Photo)

      • You can now lift the fan all the way out, and remove it.

      • The Fan Power Contacts on the Logic Board:

      Спросите у FixBot

      Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Отменить: Я не выполнил это руководство.

2 человек успешно провели ремонт по этому руководству.

Chris Green

Участник с: 10/11/09

38 396 Репутация

Автор 49 руководств

Команда

Master Techs Участник Master Techs

Community

334 членов

Автор 5 391 руководств

0 Комментарии к руководству

Добавить комментарий

Статистика просмотров:

За последние 24 часов: 6

За последние 7 дней: 14

За последние 30 дней: 45

За всё время: 2,257