Введение
This guide is meant to help with the replacement of the programmable buttons found on the top of the mouse just below the scroll wheel, the large "sniper" button on the side, and the three smaller buttons side of the mouse just below the "sniper" button.
Before you begin to disassemble the mouse, check the troubleshooting guide related to the programmable buttons. One common issue users experience with the EVGA x17 Gaming Mouse involves updating their drivers and downloading EVGA's RGB Mouse software.
-
-
-
Remove the mouse skates to reveal 5 screws.
Спросите у FixBot
-
-
-
Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.
-
-
-
-
Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.
-
-
-
Remove the 13 screws on the interior.
-
There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.
-
-
-
Remove screws from each button.
-
Press inwards and pop each button out of their socket.
-
-
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
University of Colorado Denver, Team 1-4, Campeau Fall 2023 Участник University of Colorado Denver, Team 1-4, Campeau Fall 2023
UCDENVER-CAMPEAU-F23S1G4
7 членов
Автор 11 руководств
