Запчасти

Никакие детали не требуются.

  1. Remove the two 8mm Phillips#0 screws on the back cover.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

    Добавить комментарий

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

    Добавить комментарий

    • Grasp the white wire connector on the back of the motherboard to remove the USB cable.

    • Wiggle the connector back and forth to remove it from the socket.

    Добавить комментарий

    • Desolder the joint on the front of the motherboard to completely detach the USB cable.

    • Follow this link to learn how to properly solder and desolder your parts.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Cory Davis

Участник с: 14.04.2013

236 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 12-34, Amido Spring 2013 Member of Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 членов

Автор 8 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 2

За 7 дней: 6

За 30 дней: 21

За всё время: 1,226