Введение
There are plastic clips that will need to be pried that could be broken easily. When prying anything around the screen be careful so the display/screen is not damaged.
Выберете то, что вам нужно
-
-
Use your thumbs to gently pry the silicon case away from the tablet starting at one of the corners. Once the first corner is separated the other three corners should slip off easily.
-
-
-
Use the plastic opening tool to pry the back off the tablet. Work your way around the edges. Once you have one side open you can slowly unsnap the rest of the case and use the tool as needed.
-
-
-
Gently pull the cables attached to the speaker to remove it from the back cover.
-
-
-
Use a nylon spudger to lift the battery from the right side of the device. Slowly remove the adhesive below the battery.
-
-
-
-
Desolder the battery wires from the positive and negative connection to the motherboard. Check out iFixit's How to Solder and Desolder Connections guide for soldering help.
-
Positive and Negative battery terminals.
-
-
-
Unsolder the positive and negative speaker wires from the connection on the motherboard.
-
Positive and Negative battery terminals.
-
-
-
Use the pointed end of a spudger to flip up the black tab connecting the camera's ribbon cable to the motherboard.
-
Camera ribbon clip.
-
-
-
Unsolder the Wifi wire from the connection on the motherboard.
-
WiFi terminal
-
-
-
Unsolder the display wires from the connection on the motherboard.
-
Display wires
-
-
-
Use the flat end of the spudger to lift and remove the black tape covering the ribbon connection tab.
-
-
-
Using the tip end of the spudger, slide back the black clips on the side of the right ribbon connection.
-
Repeat the same steps for the left ribbon connection.
-
-
-
Remove the following Phillips #000 screws securing the motherboard.
-
Three 3.0 mm screws
-
-
-
Plastic clips
-
Use a plastic spudger to separate the clips from the display.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
USF Tampa, Team 3-1, Sullivan Spring 2016 Участник USF Tampa, Team 3-1, Sullivan Spring 2016
USFT-SULLIVAN-S16S3G1
4 членов
Автор 10 руководств
