Перейти к основному содержанию

Fix Your Stuff

Right to Repair

Parts & Tools

Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 12 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove four Phillips (JIS) screws securing the lower display cable bracket to the logic board, of the following lengths:

Two 1.3 mm screws

One 1.4 mm screw

One 2.7 mm screw

Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

Ваш вклад лицензируется под свободной лицензией Creative Commons.