Перейти к основному содержанию
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following six screws securing the heat sink to the logic board:

Five 6.5 mm T8 Torx

One 7 mm T10 Torx

It may be necessary to hold the socket with a Phillips screwdriver on one side of the board while you unscrew the Torx screw on the other side of the board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.