Skip to main content
Help
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 10 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following four screws securing the power supply to the outer case:

Two 22.2 mm fine-thread T10 Torx

One 25 mm coarse-thread T10 Torx

One 9 mm coarse-thread T10 Torx

The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, do not touch the face of the power supply.

Ваш вклад лицензируется под свободной лицензией Creative Commons.