Перейти к основному содержанию
Помощь
Редактирование шага 16 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

Pry up only on the connector—not on the socket itself.

Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

Fold the headphone jack cable out of the way.

Ваш вклад лицензируется под свободной лицензией Creative Commons.