Перейти к основному содержанию
Помощь
Редактирование шага 32 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case.

While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.