Skip to main content
Help
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 18 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the clear plastic pull tab to gently lift the battery out of the iPhone.

If the tab breaks before the battery is freed, carefully slide a spudger under the battery tab to release the adhesive. Prying in other places may cause damage.

If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.

Before reconnecting the battery connector, be sure the contact clip (shown in red) is properly positioned next to the battery connector.

Before reassembly, clean metal-to-metal contact points with a de-greaser such as windex. The oils from your fingers have the potential to cause wireless interference issues.

Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

Ваш вклад лицензируется под свободной лицензией Creative Commons.