Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 20 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the tip of a spudger to lift the LCD connector up off its socket on the logic board.

Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

Ваш вклад лицензируется под свободной лицензией Creative Commons.