Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.

If necessary, use an iOpener or hair dryer to heat the top portion of the display and soften the adhesive securing the flex cable.

Pry up to separate the edge of the flex cable from the back of the display.

Ваш вклад лицензируется под свободной лицензией Creative Commons.