Skip to main content
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Turn the G4 over.

Remove the seven T8 Torx screws from the logic board.

The five black screws go on the right side of the logic board, the large silver screw goes at the top, and the small silver screw is located on the left side.

Ваш вклад лицензируется под свободной лицензией Creative Commons.