Перейти к основному содержанию
« Обратно ко всем историям

Successfully replaced Hard Drive cable

gdvail -

MacBook Pro 13" Unibody Early 2011

Картинка к истории

MacBook Pro 13" Unibody Early 2011 Hard Drive Cable Replacement

25 минут - 1 час

Moderate

Моя проблема

When I got the dreaded "flashing ?", I thought it was the Hard Drive and replaced the drive. That didn't fix the problem, so I assumed it was most likely the cable and ordered it from iFixit. To make the install a bit easier, I got the cable with the IR sensor/sleep LED bracket already attached. I also added electrical tape over and under the new cable to protect it.

Моё решение

The repair was easy and went very well, and best of all, it fixed the problem. I booted the computer up in OS X Internet Recovery mode and restored the system. It's working fine.

Мой совет

I'm a 73-year-old women. If I can do this, anyone can. Read the instructions, watch the videos, and just do it

Phillips #00 Screwdriver Изображение
Phillips #00 Screwdriver

$5.49

MacBook Pro 13" Unibody (Early 2011-Late 2011) Hard Drive Cable Изображение
MacBook Pro 13" Unibody (Early 2011-Late 2011) Hard Drive Cable

$34.99

« Обратно ко всем историям

0 Комментариев

Добавить комментарий

Статистика просмотров:

За последние 24 часов: 0

За последние 7 дней: 0

За последние 30 дней: 5

За всё время: 55