Parrot Bebop Drone Repair

Parrot Bebop Drone is equipped with a built-in HD camera and it’s designed to fly in safety both indoors and outdoors. The Parrot Bebop Drone is made of fiberglass reinforced ABS, which makes it both robust and safe. Even if you stop controlling the Drone while it’s in the mid-flight, it will remain stable. In a case of an emergency, if the propellers stop automatically there are detachable PPE hulls supplied in the pack that ensures safe indoors flying.

To ensure optimal stability without compromising the maneuverability, the Bebop Drone automatically analyzes data from numerous 3-axis sensors: accelerometer, gyroscope, magnetometer. One ultrasound sensor with an 8 meters reach, one pressure sensor and one vertical camera to measure speed. The parrot bebop has accelerometer and interface’s touch controls which is incredible because it allows the drone to respond to movements on smartphones or tablets. By pressing the touch control button, the drone will automatically take off or land.

Identified by model number: PF722000.

Wi-Fi: 802.11a/b/g/n/ac

Wi-Fi Aerials: MIMO Dual band

Aerials: Dipoles connected to 2.4 and 5 GHz frequency bands

Output power: Up to 21 dBm

Signal range: Up to 250 meters

Speed: 13 m/s

Sensor: CMOS 14Mpx

Optical: Fish-eye 186° 1/2,3"

Video stabilization: Digital 3-axle

Video resolution: 1920 x 1080p (30fps)

Photo resolution: 4096 x 3072 pixels

Video encoding: H264

Photo format: JPEG, RAW, DNG

Internal memory: 8 GB Flash

Magnetometer: 3-axle

Gyroscope: 3-axle

Accelerometer: 3-axle

Vertical stabilizing camera: Yes

Ultrasound sensors: Yes

Barometer: Yes

Geopositioning: GNSS (GPS + GLONASS)

Bare size: 28 x 32 x 3.6 cm

With internal hull: 33 x 38 x 3.6 cm

Bare weight: 400 g

With internal hull: 420 g

Compatibility: iOS, Android smart phones and tablets, Windows Phone

• Track down a number of hardware problems using the Parrot Bebop Drone Troubleshooting.

• Buy used on Amazon
• Manufacturers' Device Page
• Manufacturers' Parts Page
• Manufacturers' Support Page