Присоединяйся к сообществу ремонтников - Создай аккаунт

Введение

This guide will go over removing the battery for the CAT S22 Flip.The battery stores and supplies power to the main components on the device.

A faulty battery could cause the phone to perform poorly, overheat, and shut down unexpectedly.

To confirm the battery is the issue, check the CAT S22 Flip troubleshooting pages

Выберете то, что вам нужно

Unscrew the large screw on the back of the phone using a flathead screwdriver or coin.
The screw will always be completely unscrewed after 4 full counter-clockwise rotations.
The screw cannot be completely removed so that you can’t lose the screw.

There is a slot to insert a spudger at the bottom of the battery.
Use a spudger to lift the battery out of the phone.
Do not operate on a devise with a swollen battery. Do not dispose of a swollen battery into general waste systems. You can dispose of the batteries with a qualified technician or facility.

Заключение

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.