Перейти к основному содержанию
Помощь
Редактирование шага 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to pry the optical drive ribbon cable connector up off the logic board.

The connector is most easily removed when prying from the top or bottom of the connector.

Bend the optical drive ribbon cable back away from the logic board.

Be very careful when moving the optical drive ribbon cable as it is delicate and easily ripped.

Ваш вклад лицензируется под свободной лицензией Creative Commons.