Skip to main content
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Rotate the mini so that the SuperDrive slot loading mechanism is facing you.

Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.

Use tweezers to grab the connector (as seen in the picture), not the wires.

The connector is located under the optical drive opening, next to the PRAM battery.

Ваш вклад лицензируется под свободной лицензией Creative Commons.