Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Carefully disconnect the three antenna coax cables by prying them straight up from the logic board.

Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Ваш вклад лицензируется под свободной лицензией Creative Commons.