Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.