Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In this step you will disconnect the camera cable. Most machines will have a small self adhesive plastic retainer stuck to the logic board to keep the connector in place. Before disconnecting the cable, be sure this retainer is moved out of the way.

Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

Ваш вклад лицензируется под свободной лицензией Creative Commons.