Перейти к основному содержанию
Редактирование шага 9 —

Тип шага:

Перетащите чтобы изменить порядок

Lower the CPU into the socket, ensuring that all pins fall into their matching holes.

The pins do not have to be perfectly straight for this to happen, but they have to be close.

The CPU should fall into the socket without any pressure. Do not push the CPU into the socket.

If the pins don't find their holes immediately, or if only one side goes in, remove the CPU and check its pins again.

When installed correctly, the CPU will sit flush with the edges of the socket. There shouldn't be any gaps.

Ваш вклад лицензируется под свободной лицензией Creative Commons.