Skip to main content
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a Philips #00 screwdriver to loosen and remove the two 3-mm screws at the top edge of the keyboard.

These are not captive panel screws and, once loosened, will be free to move about the assembly.

Be careful not to allow either fastener into the CPU fan and duct (not shown).

Ваш вклад лицензируется под свободной лицензией Creative Commons.