Skip to main content
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the single black T8 Torx screw from the power card.

Grasp the power card near the black plastic shield toward the center of the case and lift up.

Occasionally, a post connecting the power card to the logic board will come out with the power card.

Ваш вклад лицензируется под свободной лицензией Creative Commons.