Перейти к основному содержанию
Помощь
Редактирование шага 16 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 32 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board.

Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.