Перейти к основному содержанию
Помощь
Редактирование шага 14 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Disconnect the DC-In cable from the logic board by simultaneously depressing the locking lever on the connector while pulling it away from its socket.

Remove the logic board from the outer case.

During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.