Skip to main content
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

Ваш вклад лицензируется под свободной лицензией Creative Commons.