Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Using a spudger or fingernail, lift the clear blue tab away from the connector.

Slide the locking tab on the power switch board cable connector toward the top of the console.

The locking tab will only move about 2 mm.

Pull the power switch cable straight out of the connector.

The faceplate is now free of the rest of the console.

Ваш вклад лицензируется под свободной лицензией Creative Commons.