Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If you're installing a new front panel assembly, it may need the following preparation:

Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.

Remove the small piece of adhesive backing from the digitizer cable.

Make sure all copper is covered on the new replacement screen as once fitted without this the screen will move randomly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.