Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

Ваш вклад лицензируется под свободной лицензией Creative Commons.