Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Slide the pick along the edge of the display, towards the headphone jack.

If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

Ваш вклад лицензируется под свободной лицензией Creative Commons.