Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to lift the I/O board connector up and out of its socket on the logic board

Be sure to lift straight up on the connector as you disconnect it from its socket. The socket is very deep on the logic board and prying it from side to side may damage the logic board

Remove the I/O board cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.