Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

Insert the flat end of a spudger into the gap.

The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, rock the screen up and down to weaken the adhesive until you can fit a spudger inside.

While pulling up on the suction cup, twist the spudger to widen the opening between the screen and rear case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.