Перейти к основному содержанию
Помощь

iMac 2011 SSD Replacement

Редактирование шага 4 —

% 1 Примечание:% 2 Сейчас вы редактируете исходное руководство для только что просматриваемого руководства. Любые внесённые вами изменения влияют на все направляющие% 3, включающие данный шаг.

Тип шага:

Перетащите чтобы изменить порядок

Peel the white liner off the back of the small temperature sensor board in order to expose the adhesive.

Adhere the temperature sensor board to an exposed, metal surface of the SSD, close to the SATA connector.

Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

Ваш вклад лицензируется под свободной лицензией Creative Commons .