I have replaced the power supply as well as the DC inverter board but the unit will still not power up
+
I have replaced the power supply as well as the DC inverter board but the unit will still not power up.
-
The condition was unknown before this as I also installed a 500GB HD and also 2GB RAM
+
The condition was unknown before this as I also installed a 500 GB HD and also 2GB RAM
There are no LED's lit on the mother/logic board etc so my Q being is the mother board faulty?
-
I tested the PSU at the transformer out put (5 pin plug) and I am getting 12.something volts between brown and the two blacks, however no voltages from the two greys? Correct or not?
+
I tested the PSU at the transformer output (5 pin plug) and I am getting 12 something volts between brown and the two blacks, however no voltages from the two grey? Correct or not?
I have not tested the multi pin plug at the mother board from the DC board as I cannot find any schematic diagrams as to what the connections are
I need help quick as I have ordered another mother board and have rebuilt this iMac at least 5 times in the last 48 hours! and it is driving my Mrs barmy! ha ha
Hi all
I have acquired an Apple iMac 20" iSight A1145
I have replaced the power supply as well as the DC inverter board but the unit will still not power up
The condition was unknown before this as I also installed a 500GB HD and also 2GB RAM
There are no LED's lit on the mother/logic board etc so my Q being is the mother board faulty?
I tested the PSU at the transformer out put ( 5 pin plug ) and I am getting 12.something volts between brown and the two blacks, however no voltages from the two greys? Correct or not?
I have not tested the multi pin plug at the mother board from the DC board as I cannot find any schematic diagrams as to what the connections are
I need help quick as I have ordered another mother board and have rebuilt this iMac at least 5 times in the last 48 hours! and it is driving my Mrs barmy! ha ha
Thanks
Hi all
I have acquired an Apple iMac 20" iSight A1145
I have replaced the power supply as well as the DC inverter board but the unit will still not power up
The condition was unknown before this as I also installed a 500GB HD and also 2GB RAM
There are no LED's lit on the mother/logic board etc so my Q being is the mother board faulty?
I tested the PSU at the transformer out put ( 5 pin plug ) and I am getting 12.something volts between brown and the two blacks, however no voltages from the two greys? Correct or not?
I have not tested the multi pin plug at the mother board from the DC board as I cannot find any schematic diagrams as to what the connections are
I need help quick as I have ordered another mother board and have rebuilt this iMac at least 5 times in the last 48 hours! and it is driving my Mrs barmy! ha ha
Thanks