Check the o ring where the filter holder locks in is not missing or damaged. If its there take it out and clean the o-ring and the groove it sits in thoroughly. Also ensure there is no coffee residue on the top edge of the filter holder.
Too much coffee or too fine a grind can also cause this problem
This unit is likely the same as the Rio Vapore - [http://www.partsguru.com/user/Rio%20Vapore%20SIN006_ENG.pdf|HERE] is the manual
Page 28 - troubleshooting may assist
-
These[[Device:Starbucks Barista#deviceGuides|GUIDES]] may also be useful
+
These [[Device:Starbucks Barista#deviceGuides|GUIDES]] may also be useful
Check the o ring where the filter holder locks in is not missing or damaged. If its there take it out and clean the o-ring and the groove it sits in thoroughly. Also ensure there is no coffee residue on the top edge of the filter holder.
Too much coffee or too fine a grind can also cause this problem
This unit is likely the same as the Rio Vapore - [http://www.partsguru.com/user/Rio%20Vapore%20SIN006_ENG.pdf|HERE] is the manual
Page 28 - troubleshooting may assist
-
These[http://www.ifixit.com/Device/Starbucks_Barista#deviceGuides| GUIDES] may also be useful
+
These[[Device:Starbucks Barista#deviceGuides| GUIDES]] may also be useful
Check the o ring where the filter holder locks in is not missing or damaged. If its there take it out and clean the o-ring and the groove it sits in thoroughly. Also ensure there is no coffee residue on the top edge of the filter holder.
Too much coffee or too fine a grind can also cause this problem
This unit is likely the same as the Rio Vapore - [http://www.partsguru.com/user/Rio%20Vapore%20SIN006_ENG.pdf|HERE] is the manual
Page 28 - troubleshooting may assist
+
These[http://www.ifixit.com/Device/Starbucks_Barista#deviceGuides| GUIDES] may also be useful
Check the o ring where the filter holder locks in is not missing or damaged. If its there take it out and clean the o-ring and the groove it sits in thoroughly. Also ensure there is no coffee residue on the top edge of the filter holder.
Too much coffee or too fine a grind can also cause this problem
+
+
This unit is likely the same as the Rio Vapore - [http://www.partsguru.com/user/Rio%20Vapore%20SIN006_ENG.pdf|HERE] is the manual
Check the o ring where the filter holder locks in is not missing or damaged. If its there take it out and clean the o-ring and the groove it sits in thoroughly. Also ensure there is no coffee residue on the top edge of the filter holder.
+
+
Too much coffee or too fine a grind can also cause this problem
Check the o ring where the filter holder locks in is not missing or damaged. If its there take it out and clean the o-ring and the groove it sits in thoroughly. Also ensure there is no coffee residue on the top edge of the filter holder.