You can only inspect it and check what the damage is and go from there.
''Do not try to charge it or to turn it on any more'' and ''disconnect or remove the battery from the laptop'' to minimize any further damage from occurring.
-
Here’s the http://h10032.www1.hp.com/ctg/Manual/c06219881|maintenance and service guide] for the laptop, taken from this [https://support.hp.com/us-en/product/omen-by-hp-15-dc0000-laptop-pc-series/20329817/model/21910729/manuals|webpage]
+
Here’s the [http://h10032.www1.hp.com/ctg/Manual/c06219881|maintenance and service guide] for the laptop, taken from this [https://support.hp.com/us-en/product/omen-by-hp-15-dc0000-laptop-pc-series/20329817/model/21910729/manuals|webpage]
The will help you to open the laptop and to disconnect the battery from the motherboard and also to remove/replace parts so that they can be cleaned of any corrosion caused by the water etc
Here’s a link that in general describes what to do when electronic devices have come into contact with liquids [[Electronics Water Damage]]
I suggest that if there is corrosion that you use Isopropyl Alcohol 99%+ (available from electronics parts stores) and a soft brush to gently clean away the corrosion.
You can only try cleaning it thoroughly and after making sure that it is completely dry and then has been reassembled correctly try turning it on and check what happens.
Hi @sherdil ,
You can only inspect it and check what the damage is and go from there.
''Do not try to charge it or to turn it on any more'' and ''disconnect or remove the battery from the laptop'' to minimize any further damage from occurring.
Here’s the http://h10032.www1.hp.com/ctg/Manual/c06219881|maintenance and service guide] for the laptop, taken from this [https://support.hp.com/us-en/product/omen-by-hp-15-dc0000-laptop-pc-series/20329817/model/21910729/manuals|webpage]
The will help you to open the laptop and to disconnect the battery from the motherboard and also to remove/replace parts so that they can be cleaned of any corrosion caused by the water etc
Here’s a link that in general describes what to do when electronic devices have come into contact with liquids [[Electronics Water Damage]]
I suggest that if there is corrosion that you use Isopropyl Alcohol 99%+ (available from electronics parts stores) and a soft brush to gently clean away the corrosion.
You can only try cleaning it thoroughly and after making sure that it is completely dry and then has been reassembled correctly try turning it on and check what happens.