Возврат к шагу #3
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| [* black] Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard. | |
| - | [* icon_note] During reassembly, be sure to properly re-seat the cable onto the motherboard. When re-seating, if the cable feels attached but is wobbling on the pins, it is not properly re-seated. |
| - | [* black] If one is struggling to re-seat the cable, try moving the cable more towards the board while seating it. If the cable clicks in and does not wobble when attached, it is properly seated. |
| + | [* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage. |