Перейти к основному содержанию

Changes to Step #8

Edit by Jeff Suovanen

Правка одобрена автор Jeff Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_note] The top edge of the display is secured with both glue and clips.
[*
black] Slide the opening pick underneath the display alongaround the top edgecorner of the iPhone to loosendisplay, while gently pulling or wiggling the lastdisplay '''''down''''' in the direction of the adhesiveLightning port.
[* icon_caution] The clips will break if you use too much force. Work carefully and be patient
.
[* icon_caution] Don'tAgain, don't insert the pick pastmore than a few millimeters—about the width of the display bezel here either. There is potential tobezel—or you may damage the front panel sensor array if you do.
[* icon_note] The top edge of
array.
[* black] Slide
the screen may be difficultpick to separate. If necessary, slice the opposite corner and cut any remaining adhesive repeatedly and gently wigglesecuring the display until it starts to come freedisplay.
[* icon_note] The top edge of the display is secured with both glue and clips.
[*
black] Slide the opening pick underneath the display alongaround the top edgecorner of the iPhone to loosendisplay, while gently pulling or wiggling the lastdisplay '''''down''''' in the direction of the adhesiveLightning port.
[* icon_caution] The clips will break if you use too much force. Work carefully and be patient
.
[* icon_caution] Don'tAgain, don't insert the pick pastmore than a few millimeters—about the width of the display bezel here either. There is potential tobezel—or you may damage the front panel sensor array if you do.
[* icon_note] The top edge of
array.
[* black] Slide
the screen may be difficultpick to separate. If necessary, slice the opposite corner and cut any remaining adhesive repeatedly and gently wigglesecuring the display until it starts to come freedisplay.