Возврат к шагу #5
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| + | [* black] Carefully slide the edge of an opening pick underneath the flex cable below the microphone. |
|---|---|
| + | [* black] Twist gently to separate the microphone, while being careful not to strain or damage the flex cable. |
| + | [* black] If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat. |