Возврат к шагу #7
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| [title] Lift the display slightly | |
| [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. | |
| - | [* black] Insert an opening pick |
| + | [* black] Insert an opening pick under the [link|https://guide-images.cdn.ifixit.com/igi/OCwqLCPWJbdtHHWa.full|screen and the plastic bezel|new_window=true], ***not the screen itself***. |
| [* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool. |