История Opening Procedure Шага #11

Возврат к шагу #11

Отредактированно Alex Diaz-Kokaisl - 3 мая 2023 г.

Правка одобрена автор Alex Diaz-Kokaisl

	[* icon_note] The top edge of the display is secured with both glue and clips.
	[* black] Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display *''down''* in the direction of the Lightning port.
	[* icon_caution] The clips will break if you use too much force. Work carefully and be patient.
-	[* icon_caution] ~~Again, don~~'t insert ~~the~~ pick more than ~~a few millimeters—about the width of the display bezel—or~~ you may damage the front panel sensor array.
+	[* icon_caution] Don't insert your pick more than 3 mm, as you may damage the front panel sensor array.
	[* black] Slide the pick to the opposite corner and cut any remaining adhesive securing the display.