Возврат к шагу #2
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| [* black] Use the point of a spudger to pry the battery connector straight up out of its socket. | |
| [* icon_note] Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion. | |
| [* black] Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair. | |
| - | [* icon_reminder] During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working. |