Возврат к шагу #5
Отредактированно Robert Boyd -
Правка одобрена автор Robert Boyd
- До
- После
- Без изменений
Шаг Линий
| [* black] Lift the home button bracket starting from the left side. | |
| [* black] Carefully pull it upwards toward the display, making sure not to damage the home button cable. | |
| [* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it. | |
| [* black] Scrape off as much of the old adhesive residue as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol. | |
| [* black] Secure the bracket with a [product|IF145-413-1|high bond glue|new_window=true], superglue, or [product|IF317-072-1|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed. | |
| - | [* icon_note] It may be necessary to use [guide|142291|vise clamps|new_window=true] to hold the bracket in place as the adhesive cures. |
| + | [* icon_note] It may be necessary to use [guide|142291|vise clamps|new_window=true] to hold the home button bracket in place as the adhesive cures. |