Возврат к шагу #2
Шаг Линий
| [title] Remove the rear cover | |
| [* red] One side at a time, insert a pick next to the nosepiece, slide it to the edge and pry. | |
| [* black] When both sides are loose, carefully lift the cover out. | |
| [* icon_caution] The proximity sensor is still connected, so be careful not to rip the flex cable. | |
| - | [* black] |
| + | [* black] Unlatch the clip and pull the flex cable out. It is lightly adhered to the headset. |